iCarsoftCR Pro Professional All In One Diagnostic Tool More than 40 Vehicle Makes OBD 2 Set of 5

very, very pleased, I did do some research into OBD 2 diagnostic machines which I suggest you do before buying one as not all OBD2 units cover all car make's and you need to see if it cover's your's before buying as well as making sure it cover's what you want it to do. very easy to use and even give's you a real time battery read out. you can save results to an sd card that comes with the unit, and one mine usb lead as well as the diagnostic unit lead. run's on external power supply. use by plugging into diagnostic port or as I had to do due to flat battery, I used a phone charging power pack witch works if you just want to review the data you recorded without taking the sd card out and having to find an sd card adaptor before you can read data on your pc. dose clear those dash fault light's, but will only clear for good if fault has been corrected ie repair's to car. overall good buy.

Bought to reset the airbag light on kia sorento 2013 after replacing clockspring and this did the job brilliantly. Also reads codes and resets oil service light on our other vehicle, a Mitsubishi ASX 2016. Would advise that this requires some knowledge of cars and what module you want to read etc however the user interface is great, screen is clear it feels robust and comes in carry case. Worth spending that little bit more on something that works across different vehicles and also can be updated. Came with memory card as well. Excellent item.

Had a height sensor problem. Changed both fronts. Ended up down on one side. Raise/lower knob dead no lights. Used icarsoft cr Pro.20 minutes later car all done no fault codes. We'll worth the money. Saved me an absolute fortune. Very easy to use. Thumbs up from me.

It gives a more in depth analysis compared to the cheap, sub-£20 OBD readers. It was able to identify which out of MAP/MAFF was setting code P0068 (FYI, MAFF sensor, and it was a dirty sensor element). Annoyingly, it doesn't really analyse the ABS system, certainly not down to which wheel speed sensor has failed. Then again, the local Skoda franchise couldn't either.

I use this to read codes on my Land-rover Discovery , and it reset my Audi A3 service light after the manual way failed and the local garaged IDD tool failed too . very happy with it .

Does everything you need it to, from reading manufacture specific fault codes to generic P-code. Alot of monitoring functions to monitor live feedback from the vehicle. I had the icarsoft cr plus, which was great done everything in need a scanner to do, however the cr pro is even better. Reads all the modules in my car, gives me the same modules if i used professional scanning tool for my laptop. Only drawbacks is it does not do any programming. However for an entry level professional tool its wonderful compared to prices from autel and snap-on etc.Summery,Small, discreet and does everything you need it to do.

I'm certainly no vehicle engineer, but with free updates and a multitude of vehicles available, this is a great little tool. I was aware of the cause of a current fault, but tested to see if it came up with the same diagnosis as the garage had and it did.

vehicle diagnostic tool but did notwork just came up with error message which I can not clearFile operation exceptionerror code 00