HTTYHT 3 Button Key Fob Rubber Pad Replacement Compatible with Hyundai i40 i30 i20 i10 ix20 ix30 ix35 Santa Fe Tucson Elantra Accent Car Remote Control Flip Key Fob Shell Case Buttons Cover - 3 Pack

The most important thing is that when you remove your old worn out rubber pad, the key shell needs a good clean of all rubber remnants. including under the frame that is revealed once the pad comes off. Otherwise the new pad will not sit in place. Hence people complain about it popping off because it is not sitting in place correctly in the first place. This is very important because the new pad will need to wrap around that plastic frame that's visible once the old pad comes off. It is very difficult to clean the edges under that frame. so I carefully removed the frame by levering it out with a flat head screw drivers. The frame is held in place with 6 pegs, 3 on each side. I broke 2, but was still ok. You just have to hope you don't break all of them. Once the frame is out, you get full access underneath the edges to really clean it up, then you will see how easily the new pad wraps around the frame. Finally you put the frame back in place with the new pad nicely wrapped around it. The surviving pegs should snap in place. Result: brand new key fob. It's a bonus there is 3 in pack. I replaced it on both my keys and still left one spare.

Fits Hyundai ix35. They fitted great once in but they were tricky to put in.

Fits the key for my 2016 Hyundai i10 perfectly! I replaced it with ease and have spares due to the multipack.

These replacement keypads are not fit for purpose and are a waste of money. I would request a refund from Amazon but have damaged all three by trying to make them fit. The problem is the small ridge that runs around the inside of the rubber keypad. It is fractionally wider than the original keypad which means it does not fit correctly and fall out.My recommendation is don’t waste your money unless you are prepared to use super glue

Perfect repair of my Hyundai keyfob! Thanks to the people who said you need to remove the plastic plate under the rubber pad. You absolutely must do this as the rubber keypad has a lip that needs to goes around the back of the plate. I used the large flat blade of a tool for removing a watch back to carefully prise off the plate that is held by 7 small support posts. It came off cleanly on both my key fobs. Re-assembly took several very firm pushes to locate the keypad back in the fob so that the keypad and frame were completely flush. Done like this it was completely secure.

This product could save the cost of a repair £50+Would recommend cleaning the the area once old fob is removed and for good measure add a few spots of glue to secure absolutely. Definitely with buying.

Doesn’t fit my fob for a 2014 Hyundai i30.To be fair likely not the manufacturer’s fault as I expect the shape changed for newer or older models.Otherwise seems like a quality product that would have fixed my issue with fob buttons that had mostly disintegrated and held together with tape.

Good quality rubber replacement buttons. They could do with a sticky back as they kept popping out. I’ve put a thin layer of glue around the edges to stop that but it’s a bit fiddly hence 4 stars.