Probrico (5 Pack 2-1/2 inch Center-to-Center Black Bar Cabinet Pulls, 2 1/2 inch Drawer Pulls, Modern Cabinet Hardware Kitchen Cabinet T Bar Handles Dresser Knobs Set

Recently bought a dresser that had an odd dresser pull distance between holes (2.5 in). These were the only ones I could find with that measurement and matched the theme to the room. These are great and very sturdy. I’m very surprised I like these as much as I do! I will be looking for other places to use these as well!

Your browser does not support HTML5 video.  Love the handles! However my cabinet doors 🚪 were deeper than the screws provided.I had tk go a hardware store 3 xs!!1st I tried on my own. Menards...Got 8/32 x 1-1/2This was the right length for my cabinet, however 8/32 stripped my handle!! Broke it off on my cabinet!!!I went back to my menards to exchange product and to have someone help me. They told me. Yes you need 8/32. I said. No it won't go into the handle!!!I don't even think the tried the handle.I got the smallest pk cuz I knew, it wasn't right... this time they gave me8/32 x 1-1/4This is what I needed!!! Lengeth wise anyway!I got home... broke another handle!This time I went to a local hardware store took all my handles and made them fit the screws in the handles and told them my nightmare story! 😪🤣😬You cannot get replacement screws for these handles. They have to be the bolts shown in my pics...Good luck!!!

Poor quality control. The spacing and angle of the threads is not consistent. I had to re-drill each hole in order to widen them to get these handles to fit. It should’ve been an easy swap but turned into a time consuming mess.The very first handle broke and this one pictured is unusable. Now I don’t have enough to complete all of the handles in my kitchen.In order to exchange them, I’d need to return a bunch that are already installed. It’s quite an inconvenience all because these are not made well.

Couldn't find these in black in home depot, lowes, target or walmart..so t9 not only find them here but for this cheap was wonderful! They are lighter than my bronze ones I purchased at target (a 2 pack for 10.00) but these are under 1.00 each so well worth the money. They are as strong as they need to be for my cabinets.

I built a custom closet, and decided to use these pulls as they fit the long drawers i built very well. I was a little shocked when i received these due to their lightweight construction, but decided to install them anyway. The construction is cheap, but works for its intended purpose. The included screws are really my only grievance as they are equally as cheap, and dont seem to fit a #2 phillips head bit very well, causing them to strip almost every time. They also seem to have trouble screwing into the handle's threads smoothly.Do yourself a favor and go buy new screws if you are installing anything more than 3 of these at a time. I promise you, it will save you a ton of headache and time. Screw size is M4 - 0.7, and your length will vary depending on your material thickness (remember: this is expressed in MM, not inches if you are in the US). The longer screws included in the packaging are M4-0.7 x 45mm for reference. I had 3/4" thick drawer fronts, and 1/2" drawer box thickness, so i used a 40mm bolt with no issues. Hope this helps.

So overall these are excellent. I believe that they are intended for use on cabinet doors hence the short screws that were included. My particular need was to use them for drawers and so luckily I had longer bolts available to use. Other than that the quality is excellent except I had two of the three inch pulls with issues, one issue being a scratch and the other being a misalignment. I contacted the vendor and they assured me that they would send me two other pulls replacing the defective ones. If I had to order again, I would definitely order these again. They are lovely. Please see attached photos.

I actually purchased these quite a while back, when I was planning to update my kitchen. Then we had a water-leak that destroyed the kitchen and went through a major remodel. I remembered I still had these handles tucked away and they were perfect with our new white cabinets. I just needed a couple more to finish the job. The crew that installed our cabinets made up a template to install the handles, and they look terrific! I ordered longer ones for my larger ceiling height cabinets, and shorter ones for the drawers and bottom cabinets. We've been using them a few month and so far they are holding up very well!

I originally loved the handles for the project I was working on. I run a small business and I thought these would go perfect, which they did. But here's my problem I ordered a five pack and received 3. I was just trying these out to see if I would like them originally and then planned on ordering bulk but now I can't even finish two orders with what I received. Extremely unprofessional not to mention this makes me look bad now too since I can't complete the projects I have waiting one time. I guess I'm just going to have to take my business elsewhere.. I went to the manufacturer's website and there is no phone number to reach them and only an email. I've reached out with no response yet so I don't recommend you to buy from this company because if you buy a certain amount there's no guarantee they're going to send out that amount.

These are hollow and very light weight compared to the ones you would find in your local home renovation store. It obviously does not compare in terms of the quality of metal to the real thing, but they feel just as sturdy once screwed in.Note: trying to find flat black handles in Canada can be challenging as most stores only sell oil rubbed bronze.10/10 would buy again. It also took a month to ship as it came from China, but it came one day after expected date.

The screws are cheap, SOFT metal - if you apply any kind of torque the phillips head strips away and leave you to use pliers to remove the screw, if you are lucky not to have screwed it in all the way. It's also very tricky to get the screwdriver to catch on the heads, as there is an overly large opening in the centre of the head. But, once installed, the handles look real good

This order was supposed to arrive Oct 8th but once ordered it said Oct 8 to 14 which was too late. We tried Promptly to cancel the order but couldn't. So when the product finally arrived we went to send it back only to find that it was going to be at our expense. We got 40% back which was better than nothing but less than impressed. If you aren't 100% sure you want something from this company do NOT order it. Lesson learned.

Very modern and sleep black matte finish handles.This is the 2nd set that I have ordered (the 1st one was in brushed gold). All of them came in great packaging and all in perfect condition.They provide 2 sizes of screws per handle and very easy to installVery happy with my purchase

The handles look nice in person and they’re a great value for the price, but the screw lengths are either too short or too long. I’m using these on a regular cabinet but the short screw is JUST too short and the long screw is WAY too long. Just letting you future buyers know!