HiLetgo USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug(Gray)
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

HiLetgo USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug(Gray)

4.6/5
Product ID: 357108946
Secure Transaction

Details

  • Brand
    HiLetgo
  • Connector Type
    USB Type A
  • Cable Type
    USB
  • Compatible Devices
    Modem
  • Special Feature
    数据传输
24M/s Sampling Rate
📊8 Channels
🔌USB Connectivity

Description

🔍 Debug Like a Pro with HiLetgo!

  • COMPACT PORTABLE - Lightweight design (68g) and compact dimensions (15.39 x 8.61 x 1.6 cm) make it easy to carry anywhere.
  • PRECISION ENGINEERING - Enjoy high input impedance of 1MΩ and crystal accuracy of +/-20ppm for reliable data analysis.
  • SEAMLESS CONNECTIVITY - Male-to-male USB connection ensures hassle-free data transfer at speeds up to 24 Megabits per second.
  • VERSATILE VOLTAGE RANGE - Handle a wide input voltage range from -0.5V to 5.25V, ensuring compatibility with various devices.
  • UNLEASH YOUR DATA POTENTIAL - Experience a lightning-fast 24MHz sampling rate across 8 channels, perfect for all your debugging needs.

The HiLetgo USB Logic Analyzer is a powerful tool designed for professionals, featuring an impressive 24MHz sampling rate across 8 channels, a versatile input voltage range, and high precision for accurate data analysis. Its compact design and USB connectivity make it an essential device for any tech-savvy manager looking to streamline their debugging process.

Specifications

BrandHiLetgo
Connector TypeUSB
Cable TypeUSB
Compatible DevicesModem
Special Feature数据传输
ColourGray
Connector GenderMale-to-Male
Data Transfer Rate24 Megabits Per Second
ShapeRound
Connectivity TechnologyUSB
Number of Items1
Package TypeStandard Packaging
ManufacturerHiLetgo
Model number3-01-0015
Item Weight68 g
Package Dimensions15.39 x 8.61 x 1.6 cm; 68 g
Item model number3-01-0015
Are batteries included?No

Have a Question? See What Others Asked

What software is required for Mac or PC?
What protocols does this support?
Anyone get this error msg? the application was unable to start correctly (0xc000007b). click ok to close the application.
Driver installation fails - don't know where to get support There is no web site or email address. I am following instructions posted here.

Reviews

4.6

All from verified purchases

F**B

Very happy so far

I attached this logic analyzer to an old modem's UART and was able to capture the modem's boot process using PulseView. The device was recognized as 'Saleae'.This is a great device for hobbyists: basic, simple and very affordable. I am happy with this purachase

Z**C

Good basic hobby logic analyzer

SummaryPros - inexpensive, works well with free open source softwareCons - no on board capture buffer, no probes includedThis is a good little logic analyzer for the home hobbyist or even a small development team. The hardware uses a CY7C68013A microcontroller (an 8051 MCU core with an integrated USB 2.0 interface). It comes with a USB A to mini USB B cable and some short jumpers wires. It is powered by USB so there is no other power supply to deal with.There is no on board capture buffer so your computer needs to be fast enough to receive the data as it comes over USB. With most systems that shouldn’t be an issue providing you are not doing any other intensive tasks, particularly those that use USB, at the same time. Trying to run all 8 channels at 24Mhz though could be an issue on some systems.Looking at the board, there isn’t any input buffering other than series resistors. Care must be taken not to expose the channel inputs to voltages that could damage the on board microcontroller.There is no software included, but one can download the open source sigrok/PulseView which fully supports this device. I tested it with PulseView 0.4.1 on a Windows 10 system and it was recognized as “Saleae Logic” analyzer (an older name brand analyzer). The only part that could be slightly tricky to getting PulseView working is installing the WinUSB driver using Zadig. If you are unfamiliar with Zadig, you can read about it on the sigrok wiki area for windows.Since this board emulates a “Saleae Logic”, there are also commercial software offerings that should work with it.I did an initial test using two channels simultaneously reading a 115200 bps data stream (sample rate set to 500kHz) and it worked flawlessly. PulseView easily decoded the ASCII data once configured. I again captured the same stream setting at 24Mhz (which is way over sampled for the data stream) just to see what it would do, and it worked fine showing the much more frequent sample rate.I’m not aware of a way to setup anything but a simple trigger to start/stop capture using PulseView. That is a software limitation if you are trying to catch a more complex event that occurs infrequently.The jumper wires that came with it are of limited use unless you always have available header pins to connect to in your circuit (doubtful). I suggest ordering a set of “logic analyzer test clips” to complete your setup.

J**T

Working, 8 channel logic analyzer for $12!

I can't believe this just worked. There was some initial difficulty with the driver, since I had a Hantek scope driver installed. Once I removed that and installed Saleae Logic 2, this just came up and worked! The clips were more expensive than this. And it's tiny. 1" x 2". Incredible deal.

R**N

Works well on Windows

To clarify, it isn't the device itself that works on Windows. What you receive is the module, 8 DuPont wires, and a USB cable. You are on your own from there. Attempting to get the Sigrok PulseView interface running on Ubuntu did not go well. The Windows installed worked as expected and Zadig is included in the installation directory if there is a USB driver problem. Once installed I hooked three channels to Pico PWM pins and could easily see the duty cycles as I varied the the duty_u16 parameters.For the money it is a valuable trouble shooting tool.

A**J

Great value when used with 3rd party software

The value from this little logic analyzer is great, I tested it out with a DHT11 single wire protocol digital temperature and humidity sensor + STM32 Nucleo board polling every second. Using pulseview software (other reviewers already mentioned you can use this or Saelae Logic 2) I was able to easily see the pulses and even used the built-in temperature and humidity decoder and saw correct data. It did take me a little time getting the correct drivers installed and working as expected but not too bad if you've got experience with that sort of thing. I personally found Saelae Logic 2 software more intuitive and easy to use, but after fumbling my way through pulseview I eventually began to prefer it as it seems to be more full-featured. All-in-all, I was pleasantly surprised at the capabilities of this 8-channel unit for the price I paid.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
£16.20

Duties & taxes incl.

UKstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Hiletgo Usb Logic Analyzer Device With Emi Ferrite Ring Usb | Desertcart GB