UnifitDigital Temperature Control Panel Kit Replacement Parts for Traeger Pro 20/22/34 Series Wood Pellet Smoker Grills, Including RTD Temperature Probe Sensor and Meat Probe

Direct fit for the new controller panel, no filing/grinding/drilling required.wire colors were different from Zgrills, but the board on this controller had labels which were easy to connect to the appropriate fan/flame rod/temp probe/pellet feeder wires.The included temperature probe was 1.5" too long (would have hit the lid) but it's advertised as a Traeger replacement so the risk was mine. It's connected with the factory Zgrills probe which may or may not need a replacement. Zgrills assembly requires the pellet box to be unbolted from the smoker body to get the wires through--but that's on Zgrills.Started right up and no initial issues to report.Will report back after the first smoke.First smoke: Smoker worked great last night, started up easy, temps swung a little bit at first, then stabilized and held really well.$45 well spent instead of a new smoker!!

Direct replacement. Easy to swap out and took less than 10 minutes. Only replaced the control unit but plan to do the probe later when I replace the fire pot. Can’t comment on durability, but it got my grill working ASAP.

Bought this for my Traeger Big Tex (2013 Era). Fit perfect and seemed to cure the non-stop auger run on smoke mode. Also- Really like the upgrade with the auxiliary probes that can be plugged in and used to minimize heat loss. Only slight concern is our temperature on the evening I installed it was about 30 deg/F--- But on smoke mode it seemed to be holding about 190-200. This seems to be hotter than the stock control panel that seemed to run at about 130ish deg/F in a similar ambient temperature. This was on a trial run with no actual food, for about a 15 minute maiden voyage. Hoping that with food and a little use smoke mode will cool a bit. I'll try to upgrade my review if needed. Item arrived very quickly.

I bought my Traeger in 2012 so when my blower motor failed I decided to do a complete overhaul to include upgrading the controller to get two meat probes and a cool down cycle. I was impressed with the ease of replacing the controller and temperature controller. The meat probes work well and the cool down cycle helps to remove the ash from the pot. Be careful of the connectors. Overall I'm pleased with the purchase.

It was really easy to do in about an hour, The controller didn't come with a diagram so it would be advisable to get the wire colors correct.

My original control panel was overheating my Traeger. Added this new panel along with a new hotrod and it now maintains heat very well! Excellent replacement!

Made my smoker work like new again!Easy to install!

I am not good at expressing the issues. Controller runs burner 50° colder than controller digital temperature shows.. in other words the controller shows the temperature to be 350° when the actual temperature is only 300°... consequently When you are trying to cook something at 350° the real temperature is only 300°. I contacted the seller and was told it is the feed screw not the controller. I tried to explain that the controller was controlling the feed screw at the incorrect temperature. I Amazon exchanged the unit and the second unit had the same issues. I replaced the controller with a older Traeger controller and the Traeger now runs as designed

Nice update for my older style Traeger. Seems to work well

Item as described

After installing it it worked fine